FAQ:
Q: What material do you use for mesh fence banner?
A: 9*9 grid mesh pvc, 12*12mesh pvc, 130gsm mesh fabric
Q: what's the joint less size you can print in one time?
A:For mesh pvc, size is 3x50meters, and 1.5x50meters can be print one time.
Q: How long will they be hung outdoors?
A: Normally, banners of solvent ink printing and dye sublimation printing have 1-2 year lifespan, full UV ink printing can be up to 5 year.
Q: How will they be attached?
A: Each mesh banner would be finished with eyelets, pole pocket or hemmed with hoop &loop, you can use wire tie, bungee cords, screws with washers, metal rods, pvc rods, etc.
Reinforced webbing on the edge where grommets are installed is recommended for banners that will be exposed to wind so the grommets should not rip out from high wind pressure (additional $0.5 per meter).
Q: What is it being attached to?
A: Brick wall, sheetrock, fence, stucco, scaffold, and building.
Q: Why the graphic color of banner is not as same as the one I see on computer?
A: As we all know, colors would slight vary due to different computer monitors, and jpg file shows the RGB mode, when print, it would be turned into CMYK mode, so color would be little changed. If you have a high expectation, please offer us the PMS Code, our designer would adjust the color depends on it.
Q. Are their limitations on the number of colors that can be printed?
A: No limitation, we can produce from blank to full color printing graphics.
Q. Are there any set up fees for the art to have a mesh fence banner produced?
A: No, we are happy to have an opportunity to do business with you, so no set up fee, and sample fee will be refunded once we make close the big order deal.